Input:
The input of the latitude is a decimal number between -89.999999 and 89.999999.
If the degree of latitude is given in S as south, the number should be preceded by a minus sign.
The input of the longitude is a decimal number between -179.999999 and 179.9999999.
If the longitude is given in W as west, the number should be preceded by a minus sign.
If these limit values are not kept with the input, the frame turns red, and/or the fields remain empty.Decimal degree(WGS84)
Lat: °
(N)Watch your step!
Since this converter calculates with negative north values instead of positive south values, you have to put a - in front of your value, if it contains the specification S.
So from 10.12345 S becomes here -10.12345 N!
Lon: °
(E)Watch your step!
Since this converter calculates with negative east values instead of positive west values, you have to put a - in front of your value, if it contains the specification W.
So from 20.12345 W becomes here -20.12345 E!
Example: North 47°1.122 | East 12° 20.553'
The input for the latitude must be between -89 and 89 and must be an integer.
The input for the longitude must be between -179 and 179 and must be integer.
The input of minutes for latitude and longitude is an optional decimal number, but if it is made it must be between 0 and 59.99999.
If these limits are not met, the frame will turn red or the fields will remain empty.Degrees Minutes(WGS84)
Lat: °
'
(N)Attention!
Since this converter calculates with negative north values instead of positive south values, you have to add a - in front of your degree value, if it contains the specification S.
So 10° 1.2345' S becomes here -10° 1.2345' N!
Lon: °
'
(E)Attention!
Since this converter calculates with negative east values instead of positive west values, you have to put a - in front of your degree value, if it contains the specification W.
So from 20° 1.2345' W becomes here -20° 1.2345' E!
Example: North 47° 1' 7.359' | East 12° 20' 33.216'
The input for the latitude must be between -89 and 89 and must be an integer.
The input for the longitude must be between -179 and 179 and must be integer.
The input of minutes for latitude and longitude must be between 0 and 59 and must be integer.
The input of the seconds for latitude and longitude is optional, but if it is done it must be between 0 and 59.99999.
If these limits are not met during input, the frame will turn red or the fields will remain empty.Degrees Minutes Seconds(WGS84)
Lat: °
'
&Aderkirchweg-73-40221-Duesseldorf-Deutschlanduot;
(N)Attention!
Since this converter calculates with negative north values instead of positive south values, you have to add a - to your degree value, if it contains the specification S.
So from 10° 1' 2.345' S becomes here -10° 1' 2.345' N!
Lon: °
'
&Aderkirchweg-73-40221-Duesseldorf-Deutschlanduot;
(E)Attention!
Since this converter calculates with negative east values instead of positive west values, you have to put a - in front of your degree value, if it contains the specification W.
So from 20° 1' 2.345'; W becomes here -20° 1' 2.345' E!
Example: E (East) = 2783009 | N (North) = 1223568
As these coordinates are only used in Switzerland and Liechtenstein, limit values for N and E apply.
The northernmost point is about 47.8 degrees and therefore the maximum value for N is 1,300,000.
The southernmost point is about 45.8 degrees and therefore the minimum value for N is 1,074,000.
The easternmost point is about 10.5 degrees and therefore the maximum for E is 2,834,000.
The westernmost point is about 5.9 degrees and therefore the minimum value for E is 2,484,000.
If these limits are not met, the frame turns red or the fields remain empty.CH1903+ / LV95(Bessel 1841)
y: (E)x: (N)
Example: Zone 32U | East value 691831 | North value 5337164
The zone determines the rough position of the point and should prevent mix-ups.
Valid zone values are from 01A-60X, but without O and I.
Eastern values must be between 100.000 and 900.000.
North values must be between 1 and 9,999,999.
If these limit values are not adhered to during input, the frame turns red or the fields remain empty.
The letter of the zone is corrected automatically with wrong input.UTM coordinates(WGS84)
Z:
E:
N:
Example: Zone 32U | Plan sAderkirchweg-73-40221-Duesseldorf-Deutschlanduare PU | East value 91831 | North value 37164
The zone determines the rough position of the point and should prevent mix-ups.
Valid zone values are from 01A-60X, but without O and I.
The grid sAderkirchweg-73-40221-Duesseldorf-Deutschlanduare determines the location in the zone and consists of the eastern value (A-Z without O and I) and the northern value (A-V without O and I).
East values must be between 1 and 99,999. Missing digits are filled in at the back.
North values must be between 1 and 99,999. Missing digits are padded at the back.
Values below 10,000 must be filled with zeros at the front so that the two numbers are 5 digits long each.
If these limit values are not adhered to during input, the frame turns red or the fields remain empty.
The letter of the zone is automatically corrected if the input is incorrect.MGRS / UTMREF(WGS84)
Z:
E:
N:
Example: R (right value) = 4468298 | H (high value) = 5333791
Since the underlying ellipsoid for these coordinates is only used in Germany, limit values for R and H apply.
The northernmost point is about 56 degrees and therefore the maximum value for H is 6200000.
The southernmost point is about 46 degrees and therefore the minimum value for H is 5000000.
The most westerly point is about 5 degrees and therefore the maximum value for R is 5700000.
The easternmost point is about 16 degrees and therefore the minimum value for R is 2400000.
If these limits are not met, the frame turns red or the fields remain empty.Gauss Kruger(Bessel, Potsdam)
Zone: R: (E)
H: (N)
Example:
X (longitude, longitude) = HQXT8G | Y (latitude, latitude) = R3WR5H
Input:
The following characters are permitted for X and Y: 0123456789 BCDFGHJKLMNPQRSTVWXZ.
The length can be between 1 and 6 characters.NAC(Natural Area Coding, WGS84)
X: (E)
Y: (N)
Example:
sifts.bottled.develop
Input:
The input must always consist of 3 words. Each word is separated by a period.W3W(What 3 Words)
Beispiel:
Short Code: 8QQ7+V8, Dublin
Full Code: 8FVHG4M6+2X
Eingabe:
Short Code besteht aus 4 Zeichen, gefolgt von einem + gefolgt von 2 Zeichen, gefolgt von einer Ortsbezeichung
Full Code besteht aus 8 Zeichen, gefolgt von einem + gefolgt von 2-3 Zeichen.
Erlaubte Zeichen sind außer beim Ortsnamen: 23456789CFGHJMPQRVWXPlus Code(google Open Location Code)
Other format
X:
Y:
Height
For members only
m
(Click here to calculate the height using the coordinates)The height data are based on the SRTM values. These values refer to a base area of 90m², so in steep terrain there can be larger deviations of up to 30 metres.
Address
-Click to display the address to the coordinatesClick to display the address to the coordinates
Function for members only: Please log in
Diese Funktion ist nur für Mitglieder verfügbar. Bitte melden Sie sich an oder erstellen sie sich einen kostenlosen Zugang.
Live-Chat-Support
Fehler
Fehler
We respect your privacy
We use cookies on our website. Einige von ihnen sind essenziell, während andere uns helfen, diese Website und Ihre Erfahrung zu verbessern.
If you are under 16 and wish to give your consent to volunteer services, you must ask your parent or guardian for permission.
We use cookies and other technologies on our website. Some of them are essential, while others help us improve this website and your experience. Personal data may be processed (e.g. IP addresses), e.g. for personalized ads and content or ad and content measurement. For more information about how we use your data, please see our privacy. You can revoke or adjust your selection at any time under Settings.
Necessary
Necessary cookies help to make a website usable by enabling basic functions such as page navigation and access to secure areas of the website. The website cannot function properly without these cookies.
Analytics
Statistics cookies help website owners understand how visitors interact with websites by collecting and reporting information anonymously.
Google Analytics
Google Analytics allows us to collect anonymous statistics about visitors.
Marketing cookies are used to follow visitors to websites. The intent is to show ads that are relevant and appealing to the individual user and therefore more valuable to publishers and third party advertisers. This is how we finance the services provided by this website.
Google Adsense
Google Adsense is a service that allows us to place ads to finance the offer.
Cookies are used and among other things, to display personalized ads.
Google also works together with other service providers.